Valve Type: Segmented V ball valve
Valve Nominal Size: DN25 through DN600; 1 inch through 24 inch
Pressure Rating: PN10, 16, 25, 40, 63; ANSI Class 150, 300
Body Style: Wafer or double flanged V notch ball
Flow Characteristic: Nearly equal percentage EQ%
Temperature Range: Metal seat from -20°C to 425 °C; Soft seat from -20°C to 150°C
Body Material: Carbon steel, Stainless steel
Ball Material: Stainless steel with hard chrome plated or stellite overlay
Stem Material: 17-4PH, SS316
Seat Material: Metal seat Stainless steel with hard chrome plated or stellite overlay;
Soft seat PTFE
Seat Leakage: ANSI IV, V or VI with soft seat
Actuator: Pneumatic rack and pinion actuator; Pneumatic scotch yoke actuator;
Rotary Diaphragm Actuator; Electric actuator;
Hand-wheel manual for option; Manual operator
Description & Features
CV4200 is a V ball segmented valve with metal to metal or metal to PTFE sealing and mostly used as a control valve. V-notch ball creates excellent shutoff and shearing by ball and seal, it’s suitable to control of fiber and slurry fluids service, widely applicable as power plant, chemical, paper making and light industry, .etc.
Compact construction, light weight and small volume.
One piece, leak proof valve body.
Splined shaft extra strength with no lost motion or dead band.
Straight through flow, high capacity, stable throttling.
Excellent shearing action in fibrous fluid mediums and generous clearance.
Superior trunnion bearing sintering treatment for excellent abrasion resistance and self-lubricating to eliminate galling.
Spring loaded seat for excellent sealing capacity.
Full area and reduced capacity in all sizes.
Low operating torque, accurate control.
High quality and low life cycle cost, easy disassembled seats.
